You Will Also Need
You will need the appropriate length of low voltage wire to run in one continuous length from your gate opener control box to where the transformer will be plugged into AC power. DO NOT splice this wire as voltage loss and corrosion will occur to spliced, buried wire.
This low-voltage wire must be 16-gauge, multi-stranded, dual-conductor wire. It is available from Zareba Systems (part number GW1) Customer Service or in the electrical department of most hardware stores.
Note that voltage degradation occurs the further your gate is from the AC power source. You will need to use solar panels to charge your battery if greater than 1,000-feet from an AC power source.
Situation Specific Parts
Threaded rods or carriage bolts longer than 8" - if your fence post is more than 6" in diameter the bolts in the Gate Opener kit will not be long enough
Reinforcement supplies - a thin-walled tube or panel gate may require a wood or metal reinforcement plate or pipes to adequately attach the opener arm to the gate
Horizontal cross member or mounting plate - may be needed on some types of gates for mounting the front of the opener and gate bracket to the gate.
PVC conduit for burying low voltage wire per applicable local electrical codes.
