| This
new ROFU item is designed to adjust any low voltage from12-50
VAC or 14-50 VDC down to 12 VDC!
With the ROFU 9148 Inline Controller
and a 12 volt strike or magnet in the truck,
a service call is always a one-stop job!
There is no need to go back to find a door
release that matches the voltage at the site.
Regardless of the power supply
at the site a 12 volt fail safe or fail secure release can be
operated with the ROFU 9148 controller installed in the power
circuit. The “Power
In” wires (two white) need to be connected to the
high voltage supply.
The “Power Out” wires (red is
plus, black is minus) are to be connected
to the strike or magnet. |
Output
1/2 Amp.
Dimensions
2” x 13/16” x 11/16”
Power In: (White) has 5 1/2” Leads
Power Out: (Red & Black) has 5 1/2” Leads |
