|
The Rotek-20 single door, 20 user code access control system offers
a convenient and reliable method of access control in a wide range of
applications.
The Rotek-20 is designed to work with a variety of releases, including
electric strikes and electromagnetic locks. Installation and use are
simple, even though the features of the system are quite sophisticated.
The Keypad is weather resistant and allows for indoor and outdoor installation.
The system consists of 2 parts, a keypad and a small terminal block
that can be installed for example inside an electrical junction box;
the 2 parts are connected by inserting a telephone jack coming from
the keypad into the terminal block. 2’ cable supplied.
System Features:
| Special option
mode to change the following variables:
|
- Limited access to certain user
codes.
- Keypad light control.
- Keypad Dimensions 4" x 2-1/2"
x 5/8"
- 1-99 second output timing to strike
or magnet.
- 1-99 second output timing from
an optional
- Remote push button. (not supplied
with system)
- Accepts 12 or 24 VAC or VDC
- No additional power supply needed
to strike or magnet.
|
- Programmable codes
of 1-6 digits long.
- Fraud prevention.
- Form ”C” relay output:
- EEProm memory chip
(no code loss during
power outages)
- Lighted keypad
|
2
sets of connections must be made to complete a system; one set for
power and one set to the “C” form relay output to the release. An
option is to wire in a remote push button.
Programming is done via the keypad, using the “master code” method.
Optional Accessories:
12’ extension, specify
part 49100 |
|
