Miller Edge, miller edge manufacturing, gate edge products, gate edges, sliding gate edges, swinging gate edges

MGR20
Designed specifically for easy installation on standard 2" round or square frames, the MGR20 offer 3-sided activation for an added measure of protection. When touched, these electrically activated edge sensors immediately signal the gate operator to stop and reverse. The sleek design will not detract from the appearance of the gate.

INSTALLATION: The MGR20 was designed to minimize installation time while offering customers the three-sided protection for the leading edge of the gate. These edge sensors simply clip on to the 2: frame. The rigid base extends beyond the sensitized portion of the edge sensor to form mounting flanges. To mount, drill 1/8" holes through the mounting flanges and into the gate frame every 24". Permanently attach with #10 screws. Run wire to the gate operator installation manual. Test the edge sensor and inform the property owner of their obligation to regularly test. When properly maintained, the MGR20 and MGS20 offer years of trouble free service. Note: For safe operation, use maximum 24 volt AC or DC power. For detailed instructions, contact MillerEdge, Inc.

CONFIGURE AND BUY MGR20

MillerEgde MGR20 - Quantity 1
Cover Color:
Configuration:
Enter length in feet:
Outlet Location:
Edges below 8ft long are special order- non refundable. 3-5 day lead time for shipping.

We sell gate openers,gate operators,automatic gate openers,electric gate openers,swing gate openers,slide gate openers,solar gate openers, and more.

NOTE: PLEASE FOLLOW ALL STEPS IN ORDER TO FIT YOUR NEEDS