ACT-21B, ACT-22AB, ACT-31B, ACT-34B, GT-30, GT-31, block coded transmitters, key chain transmitters, visor transmitters, transmitters

We sell gate openers,gate operators,automatic gate openers,electric gate openers,swing gate openers,slide gate openers,solar gate openers, and more.

Gate-Opener.com sells gate openers,automatic gate openers,gate operators,electric gate openers,solar gate openers,automatic gate operators,electric gate operators,electronic gate openers, and more.

We Price Match! Contact Us Now

Gate Opener Wizard

Need a Contractor?

FREE SHIPPING - On orders over $250 - Applies to UPS Ground Only (No Common Carrier) - Click here for details

1 CHANNEL BLOCK CODED VISOR TRANSMITTER - MT-1B

Product Number ACP00877

download brochure

Features:

Compatible with all Linear access receivers and controllers.
Superior transmission range.
Factory programmed MegaCode format supports over 1,000,000 codes.
Visor clip included.
9-volt battery supplied .
MegaCode format.
RF frequency: 318 MHz.
2.2" W x 3.8" H x 0.9" D

The Model MT-1B 1-Channel Block Coded Visor Transmitter is designed for use with Linear's access control products. The Model MT-1B is a single-channel device. Pressing the button on the transmitter will send a signal. A visor clip is included.

The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

2 CHANNEL BLOCK CODED VISOR TRANSMITTER - MT-2B

Product Number ACP00746

download brochure

Features:

Compatible with all Linear access receivers and controllers.
Superior transmission range.
Factory programmed MegaCode format supports over 1,000,000 codes.
Visor clip included.
9-volt battery supplied.
MegaCode format.
RF frequency: 318 MHz.
2.2" W x 3.8" H x 0.9" D

The Model MT-2B 2-Channel Block Coded Visor Transmitter is designed for use with Linear's access control products. The Model MT-2B is a two-channel device. Pressing the left button on the transmitter will send a channel one signal. Pressing the right button on the transmitter will send a channel two signal. A visor clip is included.

The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

1 CHANNEL BLOCK CODED VISOR TRANSMITTER - MDT-1B

Product Number ACP00721

download brochure

Features:

Compatible with all Linear access receivers and controllers.
Superior transmission range.
Factory programmed MegaCode format supports over 1,000,000 codes.
Visor clip included.
Two type 2032 lithium batteries supplied.
MegaCode format.
RF frequency: 318 MHz.
1.6" W x 4.2" H x 0.8" D

The Model MDT-1B 1-channel Block Coded Visor Transmitter is designed for use with Linear's access control products. The Model MDT-1B is a single-channel device. Pressing either the round button on the transmitter's front, or the small button on the transmitter's top will send the same signal. The top button can be hidden with the top button cover supplied. Also included are lithium batteries with a five-year service life and a visor clip.

Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.

3 CHANNEL BLOCK CODED VISOR TRANSMITTER - MDT-2B

Product Number ACP00720

download brochure

Features:

Compatible with all Linear access receivers and controllers.

Superior transmission range.

Factory programmed MegaCode format supports over 1,000,000 codes.

Visor clip included.

RF frequency: 318 MHz.

Two type 2032 lithium batteries supplied.

1.6" W x 4.2" H x 0.8" D

The Model MDT-2B 3-channel Block Coded Visor Transmitter is designed for use with Linear's access control products. The Model MDT-2B is a three-channel device. Pressing the transmitter's left or right front button sends channel one or two. Pressing the small button on the transmitter's top sends channel three. The top button can be hidden with the top button cover supplied. Also included are lithium batteries with a five-year service life and a visor clip.

The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

5 CHANNEL BLOCK CODED VISOR TRANSMITTER - MDT-4B

Product Number ACP00722

download brochure

Features:

Compatible with all Linear access receivers and controllers.

Superior transmission range.

Factory programmed MegaCode format supports over 1,000,000 codes.

Visor clip included.

Two type 2032 lithium batteries supplied.

1.6" W x 4.2" H x 0.8" D

The Model MDT-4B 5-channel Block Coded Visor Transmitter is designed for use with Linear's access control products. The Model MDT-4B is five-channel device. Pressing one of the transmitter's front buttons sends channel one through four. Pressing the small button on the transmitter's top sends channel five. The top button can be hidden with the top button cover supplied. Also included are lithium batteries with a five-year service life and a visor clip.

Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.

Gate operator installations should be completed by a qualified installer only. B.J. Esberner and Associates, Inc. assumes no liability if product is installed incorrectly. Please see owners / installation manual for further details.

Join our mailing list to keep informed of new products and sales!
Enter your email address below, then click the 'Join Now' button:

Featured Links:
- Electric Gate Openers
- Need Contractor?