Single or Dual Slide
Gate Openers - GTO/PRO SL-2000B Click to Order
Low voltage swing gate operator |
• Adjustable obstruction sensing, auto closing and gate sequencing
• Compatible with all GTO/PRO® and Linear™ accessories
• Dependable—Versatile—Affordable
• Easy installation for a multitude of applications
• 24 month Limited Warranty
• System certified to be in compliance with UL 325, 4th edition
|
 |
| Features
... |
|
Benefits
... |
• Handles single or
double gates up to 30' (9.1 m) long, with 20’ (6.1 m) opening,
up to 1000 lbs. (453.6 kg) each leaf.
• Heavy Duty SL-2000B Series Control Board provides adjustable
obstruction and inertia sensing in both open and close modes; adjustable
auto closing; adjustable gate sequencing.
• Heavy duty, transformer.
• Fully systems capable; “add on ready.”
• Compatible with a variety of accessories.
• Mounting legs standard; concrete pad mounting available.
• Increases the number of applications where operator(s) can
be used. |
|
• Extreme resistance
to lightning and static.
Dependable. Versatile. Affordable.
• Excellent for heavy traffic areas; high daily usage.
• Provides safe, economical low voltage operation.
• Provides more options: works with all accessories, or any
accessory that will work with a 12 volt system or that has its own
power supply.
• Easy installation for a multitude of applications. |
| DRIVE
|
| |
• Powered
by a 12 volt motor with integral case hardened steel gear reduction
to 90 RPM. Generates 310 inch pounds torque at 12 volts. Temperature
rating of motor -30o F (-34o C ) to +160o F ( 93o C).
• Opening time is one foot per second.
|
 |
| POWER |
| |
• The GTO/PRO SL-2000B
system is powered by a 12 volt DC / 7.0 amp hour, sealed, rechargeable
gel-cell battery.
• Battery charge for GTO/PRO SL-2000B is maintained by a 120
volt AC / 60 hertz input and 18 volt AC at 40 VA (2.9 amperes) output
transformer rectified to 14 volt DC through the GTO Control Board.
Control board fuses are 20 amps.
NOTE: Transformer should not be connected directly to any battery.
NOTE: Do not replace fuses with larger fuses; this will void the warranty
and may damage the unit.
|
| CONTROL |
| |
• GTO microprocessor
controlled board can be programmed to open left-to-right or right-to-left.
Adjustable auto close, inertia and obstruction sensitivity. Temperature
compensated circuits. Auto-memorization of digital transmitter code.
Charging regulated circuit on control board. "Sleep draw"
is 40 mA; "active draw" is 5 to 13 amps.
• GTO remote-mounted RF receiver tuned at 318 MHz.
• Limit controls are mechanical. Normally open contact.
• Fully compatible accessory terminal block provides connections
for safety loops, wands, intercoms, card readers, phone systems, etc.
|
| OPERATIONAL
CAPACITY |
| |
• The
GTO/PRO SL-2000B will handle gates weighing up to 1000 lbs. (453.6
kg) and up to 30 ft. (9.1 m) in length (per leaf) if all proper installation
procedures have been followed. Note that ball bearing rollers and
covers should be used on all gates.
|
| Gate Capacity
Chart (estimated number of cycles based
on use with a transmitter) |
Gate
Length |
20 ft. |
80 |
70 |
60 |
50 |
| 16 ft. |
100 |
90 |
80 |
70 |
| 12 ft. |
120 |
110 |
100 |
90 |
| 8 ft. |
140 |
130 |
120 |
110 |
| |
400 lb. |
600 lb. |
800 lb. |
1000 lb. |
| Gate
Weight |
|
| GTO/PRO SL-2000B (FMS2000B) |
Designed for chain link, tubular steel or ornamental
iron gates.
• Two year warranty.
• Easy installation, no electrician required.
• Battery operated and will provide 25 cycles without being
charged (12 volt battery and control board included in control box).
• Optional Large Battery Kit available (provides up to 50 cycles
without being charged).
• Heavy duty AC transformer.
• Fully systems capable and programmable for a wide range of
options.
• Improved design enhances safety. (Always read the safety instructions.)
• Internal lock included. This
built-in locking device locks the gate in the closed position and
automatically releases when the gate operator is activated by an entry
device.
• Will operate a gate up to 30 ft. (9.1 m) long with a 20 ft.
(6.1 m) opening, weighing up to 1000 lbs (453.6 kg).
• Includes operator, mounting legs, AC transformer, receiver/antenna
with cable, entry transmitter, mounting hardware, chain, installation
manual, safety instructions, and warning signs. |
| GTO/PRO
SL-2200B (FMS2200B) |
| • Designed to work as a slave unit with
the GTO/PRO SL-2000B, for dual gates. Includes second gate operator, mounting hardware, battery and battery harness, 60 ft. (18.29 m) connecting cable, installation manual, safety instructions, and warning signs. Opens gates up to 30 ft. (9.1 m) long each side with up to a 20 ft. (6.1 m) opening. |
GTO/PRO-SL2000B
Accessories
|
