FAAC slide gate operators,residential slide gate openers,commercial slide gate openers,746Z16,746Z20,FAAC35S1,FAAC3512,FAAC2002,FAAC2278,FAAC746,chain gate openers,rack and pinion gate openers,sliding gate openers,continuous duty gate openers,heavy traffic gate openers,slide gate accessories,replacement chains,gear rack,foundation plate,mounting plates,light commerical gate operator,high traffic applications,half a horsepower slide gate opener

We sell gate openers,gate operators,automatic gate openers,electric gate openers,swing gate openers,slide gate openers,solar gate openers, and more.

Gate-Opener.com sells gate openers,automatic gate openers,gate operators,electric gate openers,solar gate openers,automatic gate operators,electric gate operators,electronic gate openers, and more.

We Price Match! Contact Us Now

Gate Opener Wizard

FREE SHIPPING - On orders over $300 - Applies to UPS Ground Only (No Common Carrier) - Click here for details

FAAC GATE OPENERS

MODEL 746 RESIDENTIAL & LIGHT COMMERCIAL SLIDE GATE OPERATORS (1/2 HP)

THE MODEL 746 is designed for residential and light duty commercial applications. Available in chain and rack&pinion versions. 1/2 HP motor features Gentle Slide™ Motion Management. Model 746 has 2 year limited warranty
MODEL 746 CHAIN KITS INCLUDE:

Operator

Control panel (746 MPS)

Sprocket

Idlers and protective cover

Easy install limit switch plates

Mounting angle brackets

chain-to-gate mounting hardware with nickel plated master links

Chain is not included (Installation kits available)
MODEL 746 RACK & PINION KITS INCLUDE:

Operator

Control panel (746 MPS)

Pinion

Mounting angle brackets

Limit switch plates

Rack is not included (Installation Kits available)
FEATURES:

Gentle Slide™ Motion Management

External limits

Manual release (non-keyed)

230 VAC

"Soft Stop" on opening and closing

1/2 hp motor

Duty Cycle: 50% motor run time

Microprocessor Control:

Choose from two models:

a) signal open, signal closed

b) automatic logic

BUY MODEL 746 Installation KITS FOR CHAIN AND RACK & PINION OPERATORS- the installation kit you order depends on the following: does your operator have a chain or a rack & pinion drive? If your operator has a rack & pinion drive, do you want a pedestal or foundation plate? Refer to the proper kit description below for you installation
PART NUMBER	DESCRIPTION	PRICE	QTY.
FAAC3501	Slide Installation Kit with Pedestal for chain operators include- 30ft nickel plated chain, mounting pedestal, NEMA4 fiberglass enclose with backplate and power switch, hardware set for enclosure-to-pedestal attachment, 2 sets of conduit and connectors for conducting enclosure to operator, 2 caution signs	$450.00
FAAC35S1	Slide Installation Kit with Pedestal for chain operators include- same as above but with 30ft stainless steel chain	$667.00
FAAC3503	Slide Installation Kit with Pedestal for rack & pinion operators include- 23ft gear rack, mounting pedestal, NEMA4 fiberglass enclosure-to-pedestal attachment, 2 sets of conduit and connectors for connection enclosure to operator, 2 caution signs	$650.00
FAAC3512	Slide Installation Kit with Foundation Kit for rack & pinion operators include- 23ft gear rack, foundation plate, NEMA4 fiberglass enclosure-to-pedestal attachment, 2 caution signs	$510.00

BUY STAND ALONE ACEESORIES FOR MODEL 746 SLIDE OPERATORS
PART NUMBER	PART NUMBER	YOUR PRICE	QTY.
FAAC2000	Nickel Plated Chain - #40 nickel plated chain, comes with two master links with each length of chain you order	$5.25 /ft	feet
FAAC2002	Stainless Steel Plated Chain - you receive two master links with each length of chain you order	$15.00 /ft	feet
FAACCTG01	Chain-to-Gate Mounting Hardware - the hardware needed to attach the two ends of nickel plated chain to the gate. Includes 2 mounting brackets, 2 tension bolts and 2 master links (all nickel plated)	$121.95
FAAC719323	Gear Rack - the galvanized steel rack section measures 3.28ft long and works with any FAAC slide gate operators. Supplied with rack-to-gate hardware	$47.00
FAAC2278	Foundation Plate (for ground level mounting) - the plate measures 6 x 10.5 in. and has rebar anchors to be set in the concrete pad	$55.00
FAAC2411	Mounting Pedestal (for elevated mounting) - 18 in. galvanized mounting pedestal	$180.00

More accessories such as: Photocells, Photobeams, Warning Lamps, Timers and more click here

Gate operator installations should be completed by a qualified installer only. B.J. Esberner and Associates, Inc. assumes no liability if product is installed incorrectly. Please see owners / installation manual for further details.

Join our mailing list to keep informed of new products and sales!
Enter your email address below, then click the 'Join Now' button:

Featured Links:
- Electric Gate Openers