We sell gate openers,gate operators,automatic gate openers,electric gate openers,swing gate openers,slide gate openers,solar gate openers, and more.
Gate-Opener.com sells gate openers,automatic gate openers,gate operators,electric gate openers,solar gate openers,automatic gate operators,electric gate operators,electronic gate openers, and more.
     We Price Match! Contact Us Now
Gate Opener Wizard
   
Need a Contractor?
Gate-Opener.com Home - Gate Opener list Gate-Opener.com Privacy Policy Gate-Opener.com UL325 Safety Standards Gate-Opener.com New Vendors Gate-Opener.com Credit Application Gate-Opener.com Contact Us
Easy DIY Gate Openers | Residential Gate Operators | Commercial Gate Operators | Intercom/Telephone Entry Systems |
Swing Gate Operators | Slide Gate Operators | Gate Operators Accessories | Gate Hardware | Installation Manuals
FREE SHIPPING - On orders over $250 - Applies to UPS Ground Only (No Common Carrier) - Click here for details
6300 COMMERCIAL / INDUSTRIAL SWING GATE OPERATOR
6300 (1/2HP) Quick Specs: 1/2HP Motor, 115VAC, 230VAC or 460VAC, max gate length - 18ft, max gate weight - 700lbs
6300 (1HP) Quick Specs: 1HP Motor, 115VAC, 230VAC or 460VAC, max gate length - 22ft, max gate weight - 800lbs
APPLICATIONS:
The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.
ADVANCED FEATURES:
Self-adjusting, no maintenance limits. Overlap feature for dual swing gate operation. Designed with a built-in primary and secondary entrapment prevention system. Ports for plug-in loop detectors. Two convenience outlets. Fail-safe release. Tamper detect circuit. DC Powered convenience open (optional). Gate tracker reporting output. Programming switches. Built-in reset switch. Built-in power On/Off switch.
SPECIFICATIONS:
Model 6300 with 1/2 HP Motor: Maximum gate width 18-feet. Maximum gate weight 700 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.) Swings gate 90 degrees in approximately 15-seconds. 1/2 HP continuous-duty motor. 115 VAC. 230 VAC. 460 VAC. Class I, II, III and IV applications. Compliant with UL 325 and 991. ETL Listed.

built in alarm
and power switch
worm drive

programming
switches
convenience
outlets
(Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.) Dimensions (operator only): 13.25"W x 12"H* x 28"D (* Height of operator only. Actual height above ground is determined by which mounting method is used)
Model 6300 with 1 HP Motor: Maximum gate width 22-feet. Maximum gate weight 800 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.) Swings gate 90 degrees in approximately 15-seconds. 1 HP continuous-duty motor. 115 VAC. 230 VAC. 460 VAC. Class I, II, III and IV applications. Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.) Dimensions (operator only): 13.25"W x 12"H* x 28"D (* Height of operator only. Actual height above ground is determined by which mounting method is used)
OPTIONS AVAILABLE WITH THIS OPERATOR:
Master / slave connection cable (slave operator is shipped with 50-feet of cable). Post or pad mount - specify which. DC powered convenience open. Plug-in loop detectors. Heater kit for cold environments.
BUY MODEL 6300 RESIDENTIAL SWING GATE OPERATOR - 1/2 HP
Doorking gate openers do not come with built-in receivers or transmitters. Please specify if you need the additional receiver with 2-transmitters package option.
PART # DESCRIPTION LIST PRICE
YOUR PRICE		 QTY
DK6300-080
6300 Master Operator 115 Volt - 1/2 HP, 115VAC
commercial / industrial unit. Control board is mounted
in the unit. Handles gates up to 18 feet long. Approx.
14 - 16 seconds to open gate 90°. Operator only -
must select either post or pad mounting kit.
$2460.00
$1407.95
DK6300-088
6300 Master Operator 230 Volt - 1/2 HP, 230VAC
commercial / industrial unit. Control board is mounted
in the unit. Handles gates up to 18 feet long. Approx.
14 - 16 seconds to open gate 90°. Operator only -
must select either post or pad mounting kit.
$2880.00
$1647.95
DK6300-092 6300 Master Operator 460 Volt - 1/2 HP, 460VAC
commercial / industrial unit. Control board is mounted
in the unit. Handles gates up to 18 feet long. Approx.
14 - 16 seconds to open gate 90°. Operator only -
must select either post or pad mounting kit.		 $2880.00
$1647.95
DK6300-081
6300 Slave Operator -1/2HP slave operator. Use
with 6300-088 and 6300-092 master units. Does not
include control board. Operator only - must select
either post or pad mounting kit.
$1950.00
$1115.95
DK6300-082
6300 Master Operator with Battery Back-Up
115 Volt - same as 6300-080 master unit, but includes
a battery powered drive system designed to open
the gate during power outages Operator only - must
select either post or pad mounting kit.
$3240.00
$1853.95
DK6300-089
6300 Master Operator with Battery Back-Up
230 Volt - same as 6300-088 master unit, but includes
a battery powered drive system designed to open
the gate during power outages. Operator only - must
select either post or pad mounting kit.
$3660.00
$2093.95
DK6300-093
6300 Master Operator with Battery Back-Up
460 Volt - same as 6300-092 master unit, but includes
a battery powered drive system designed to open
the gate during power outages. Operator only - must select either post or pad mounting kit.
$3660.00
$2093.95
DK6300-083
6300 Slave Operator -1/2HP slave operator. Use with
6300-082 and 6300-089 and 6300-093 master units.
Does not include control board. Operator only -
must select either post or pad mounting kit.
$2680.00
$1533.00
DK2600-243
Post Mounting Kit - Post mounting kit allows the
operator to be mounted on pipes. Kit includes two
4 inch x 3 foot pipes and necessary hardware. Use
this kit with the 6300 operators only.
 $350.00
$201.95
DK2600-244
Pad Mounting Kit - pad mounting kit allows the
operator to be mounted directly to a concrete pad. Kit
includes mounting base and necessary hardware. Use
this kit with the 6300 operator only.
 $350.00
$201.95
DOORKING OPTIONS...
DK-REC-TRAN-PKG
Package includes: Two MLT3089 single button multi code transmitters and one MLTA1099 multi code receiver
 $105.00
NO UPS - SHIPS BY COMMON CARRIER ONLY
BUY MODEL 6300 RESIDENTIAL SWING GATE OPERATOR - 1 HP
Doorking gate openers do not come with built-in receivers or transmitters. Please specify if you need the additional receiver with 2-transmitters package option.
PART # DESCRIPTION LIST PRICE
YOUR PRICE		 QTY
DK6300-084
6300 Master Operator 115 Volt - 1 HP, 115VAC
commercial / industrial unit. Control board is mounted
in the unit. Handles gates up to 22 feet long. Approx.
14 - 16 seconds to open gate 90°. Operator only -
must select either post or pad mounting kit.
$2900.00
$1658.95
DK6300-090
6300 Master Operator 230 Volt - 1 HP, 230VAC
commercial / industrial unit. Control board is mounted
in the unit. Handles gates up to 22 feet long. Approx.
14 - 16 seconds to open gate 90°. Operator only -
must select either post or pad mounting kit.
$3320.00
$1899.95
DK6300-094 6300 Master Operator 460 Volt - 1 HP, 460VAC
commercial / industrial unit. Control board is mounted
in the unit. Handles gates up to 22 feet long. Approx.
14 - 16 seconds to open gate 90°. Operator only -
must select either post or pad mounting kit.		 $3320.00
$1899.95
DK6300-085
6300 Slave Operator -1HP slave operator. Use with
6300-084, 6300-090 and 6300-094 master units.
Does not include control board. Operator only
- must select either post or pad mounting kit.
$2390.00
$1367.95
DK6300-086
6300 Master Operator with Battery Back-Up
115 Volt - same as 6300-084 master unit, but
includes a battery powered drive system designed
to open the gate during power outages
Operator only - must select either post or
pad mounting kit.
$3680.00
$2105.00
DK6300-091
6300 Master Operator with Battery Back-Up
230 Volt - same as 6300-090 master unit, but
includes a battery powered drive system designed
to open the gate during power outages
Operator only - must select either post
or pad mounting kit.
$4100.00
$2345.95
DK6300-095
6300 Master Operator with Battery Back-Up
460 Volt - same as 6300-094 master unit, but
includes a battery powered drive system designed
to open the gate during power outages
Operator only - must select either post or pad mounting kit.
$4100.00
$2345.95
DK6300-087
6300 Slave Operator -1HP slave operator. Use with
6300-082 and 6300-086, 6300-091 and 6300-095
master units. Does not include control board. Operator
only - must select either post or pad mounting kit.
$3160.00
$1807.95
DK2600-243
Post Mounting Kit - Post mounting kit allows the
operator to be mounted on pipes. Kit includes two
4 inch x 3 foot pipes and necessary hardware. Use
this kit with the 6300 operators only.
 $350.00
$201.95
DK2600-244
Pad Mounting Kit - pad mounting kit allows the
operator to be mounted directly to a concrete pad. Kit
includes mounting base and necessary hardware. Use
this kit with the 6300 operator only.
 $350.00
201.95
DOORKING OPTIONS...
DK-REC-TRAN-PKG
Package includes: Two MLT3089 single button multi code transmitters and one MLTA1099 multi code receiver
 $105.00
NO UPS - SHIPS BY COMMON CARRIER ONLY
More accessories such as: radio transmitters, receivers, exit & reverse loops, digital keypads,
gate locks and more - click here
Gate operator installations should be completed by a qualified installer only. B.J. Esberner and Associates, Inc. assumes no liability if product is installed incorrectly. Please see owners / installation manual for further details.
© Copyright 1997-2007
1 800 593 6095 Toll Free
Contact Us

  Join our mailing list to keep informed of new products and sales!
Enter your email address below, then click the 'Join Now' button:
 
Enter Email:

AAS | AeGIS | AGS | Aiphone | Aleen Technologies | Allstar | Antech | Apollo | BD Loops | Byan Systems | Chamberlain | Click2Enter | Cyrex | DC Solutions | Diablo Controls | Doorking | Dorene | Eagle | Elite | EMX | EntryWay | FAAC | G T O | Hy-Security | Keri Systems | LiftMaster | Linear | Mighty Mule | Miller Edge | MS Sedco | OSCO | Pach and Company | Preferred Power Products | Ramset | Reno A&E | ROFU | SEA | Securakey | Securitron | Sentex Systems | SES | Signal-Tech | Sos | Tektone | Tomar | Trigon Electronics | US Automatic | Zareba
Featured Links:
- Electric Gate Openers
- Need Contractor?