Doorking Total Access Control featuring 9150 Commercial and Industrial Slide Gate Operator

We sell gate openers,gate operators,automatic gate openers,electric gate openers,swing gate openers,slide gate openers,solar gate openers, and more.

Gate-Opener.com sells gate openers,automatic gate openers,gate operators,electric gate openers,solar gate openers,automatic gate operators,electric gate operators,electronic gate openers, and more.

We Price Match! Contact Us Now

Gate Opener Wizard

FREE SHIPPING - On orders over $300 - Applies to UPS Ground Only (No Common Carrier) - Click here for details

9150 COMMERCIAL / INDUSTRIAL SLIDE GATE OPERATOR

9150 (1/2HP) Quick Specs: 1/2HP Motor, 115VAC, 230VAC or 460VAC, max gate length - 30ft, max gate weight - 1000lbs

9150 (1HP) Quick Specs: 1HP Motor, 115VAC, 230VAC or 460VAC, max gate length - 45ft, max gate weight - 1500lbs

APPLICATIONS:
Model 9150 operators are designed to operate vehicular slide gates in residential, commercial and industrial applications. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements. The 9150 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.
ADVANCED FEATURES:
Self-adjusting, no maintenance limits. Partial-open feature. Anti-tailgating feature. Gate tracker reporting output. Ports for plug-in loop detectors. DC Powered Convenience Open (Optional). Two convenience outlets. Fail-safe release (fail-secure optional). Programming switches. Built-in reset switch. Built-in power On/Off switch.
SPECIFICATIONS:
Model 9150 with 1/2 HP Motor:
Maximum gate length 30-feet. Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.) 1/2 HP continuous-duty motor. 115 VAC 230 VAC 460 VAC Operator is shipped with chain brackets and 20-feet of #40 chain. Class I, II, III and IV applications. Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.) Dimensions: 15"W x 24"H x 16.5"D

9150 Tech Info (pdf)

swing up
circuit boards

built in alarm
and power switch

programming
switches

partial open
feature

Model 9150 with 1 HP Motor: Maximum gate length 45-feet. Maximum gate weight 1500 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.) 1 HP continuous-duty motor. 115 VAC 230 VAC 460 VAC Operator is shipped with chain brackets and 20-feet of #40 chain. Class I, II, III and IV applications. Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.) Dimensions: 15"W x 24"H x 16.5"D
OPTIONS AVAILABLE WITH THIS OPERATOR: DC powered convenience open. Stainless steel housing. Nickel plated chain. Stainless steel chain. Plug-in loop detectors. Heater kit for cold environments. Base plate to post mount this operator (does not include posts

BUY MODEL 9150 COMMERCIAL / INDUSTRIAL SLIDE GATE OPERATOR - 1/2HP

Doorking gate openers do not come with built-in receivers or transmitters. Please specify if you need the additional receiver with 2-transmitters package option.

PART #

DESCRIPTION

LIST PRICE
YOUR PRICE

QTY

DK9150-084

9150 Operator - 1/2HP, 115VAC commercial /
industrial unit designed for gates up to 30 ft long
weighting up to 1000lbs. Gate speed is
approximately 1ft/sec. Full feature circuit board.
Includes 20 feet of #40 chain.

$2~~380.00~~
$1361.95

DK9150-085

9150 Operator - 1/2HP, 230VAC commercial /
industrial unit designed for gates up to 30 ft long
weighting up to 1000lbs. Gate speed is
approximately 1ft/sec. Full feature circuit board.
Includes 20 feet of #40 chain.

$2~~800.00~~
$1605.95

DK9150-090

9150 Operator - 1/2HP, 460VAC commercial /
industrial unit designed for gates up to 30 ft long
weighting up to 1000lbs. Gate speed is
approximately 1ft/sec. Full feature circuit board.
Includes 20 feet of #40 chain.

$2~~800.00~~
$1605.95

DK9150-086

9150 Operator with Battery Back Up - 1/2HP,
115VAC same as 9150-084 but includes a battery
powered drive system designed to open the gate
during power outages. Includes 20 feet of #40 chain.

$~~3160.00~~
$1813.25

DK9150-087

9150 Operator with Battery Back Up - 1/2HP,
220VAC same as 9150-085 but includes a battery
powered drive system designed to open the gate
during power outages. Includes 20 feet of #40 chain.

3~~580.00~~
2057.50

DK9150-091

9150 Operator with Battery Back Up - 1/2HP,
460VAC same as 9150-090 but includes a battery
powered drive system designed to open the gate
during power outages. Includes 20 feet of #40 chain.

$3~~580.00~~
$2057.50

DOORKING OPTIONS...

DK-REC-TRAN-PKG

Package includes: Two MLT3089 single button multi code transmitters and one MLTA1099 multi code receiver

$105.00

NO UPS - SHIPS BY COMMON CARRIER ONLY

BUY MODEL 9150 COMMERCIAL / INDUSTRIAL SLIDE GATE OPERATOR - 1HP

Doorking gate openers do not come with built-in receivers or transmitters. Please specify if you need the additional receiver with 2-transmitters package option.

PART #

DESCRIPTION

LIST PRICE
YOUR PRICE

QTY

DK9150-080

9150 Operator - 1HP, 115VAC commercial /
industrial unit designed for gates up to 45 ft long
weighting up to 1500lbs. Gate speed is approx.
1ft/sec. Full feature circuit board. Includes
20 feet of #40 chain.

$2~~900.00~~
$1843.75

DK9150-081

9150 Operator - 1HP, 230VAC commercial /
industrial unit designed for gates up to 45 ft long
weighting up to 1500lbs. Gate speed is approx.
1ft/sec. Full feature circuit board. Includes
20 feet of #40 chain.

$~~3320.00~~
$1899.95

DK9150-088

9150 Operator - 1HP, 460VAC commercial /
industrial unit designed for gates up to 45 ft long
weighting up to 1500lbs. Gate speed is approx.
1ft/sec. Full feature circuit board. Includes
20 feet of #40 chain.

$3320.00
$1899.95

DK9150-082

9150 Operator with Battery Back Up - 1HP,
115VAC same as 9150-080 but includes a battery
powered drive system designed to open the gate
during power outages. Includes 20 feet of #40 chain.

$3~~680.00~~
$2105.00

DK9150-083

9150 Operator with Battery Back Up - 1HP,
220VAC same as 9150-081 but includes a battery
powered drive system designed to open the gate
during power outages. Includes 20 feet of #40 chain.

$~~4100.00~~
$2345.95

DK9150-089

9150 Operator with Battery Back Up - 1/2HP,
460VAC same as 9150-088 but includes a battery
powered drive system designed to open the gate
during power outages. Includes 20 feet of #40 chain.

$~~4100.00~~
$2345.95

DOORKING OPTIONS...

DK-REC-TRAN-PKG

Package includes: Two MLT3089 single button multi code transmitters and one MLTA1099 multi code receiver

$105.00

NO UPS - SHIPS BY COMMON CARRIER ONLY

BUY MODEL 9150 SLIDE OPERATOR ACCESSORIES
PART #	DESCRIPTION	LIST PRICE	YOUR PRICE	QTY
DK2600-441	#41 Chain - 20 feet of #41 chain and two master links	8~~4.00~~	49.95
DK2600-442	#40 Chain - 20 feet of #40 chain and two master links	1~~17.00~~	69.95
DK2600-448	#60 Chain - 20 feet of #60 chain and two master links	1~~76.50~~	104.95
DK2600-865	Lock-Kit - retro-fit kit to change solenoid function on the 9100 operators from fail-safe to fail-secure	~~29.50~~	17.95
DK2600-495	Base Plate - use to post mount the 9150 operators. Does not include post.	~~115.50~~	68.95

More accessories such as: radio transmitters, receivers, exit & reverse loops, digital keypads, gate locks and more - click here

Gate operator installations should be completed by a qualified installer only. B.J. Esberner and Associates, Inc. assumes no liability if product is installed incorrectly. Please see owners / installation manual for further details.

Join our mailing list to keep informed of new products and sales!
Enter your email address below, then click the 'Join Now' button:

Featured Links:
- Electric Gate Openers