| 9050 / 9070 RESIDENTIAL & LIGHT COMMERCIAL SLIDE OPERATORS |
| 9050
Quick Specs: 1/3HP Motor, 115VAC, max gate length - 16ft, max
gate weight - 400lbs |
| 9070
Quick Specs: 1/2HP Motor, 115VAC, max gate length - 22ft, max
gate weight - 500lbs |
 |
APPLICATIONS:
The Model 9050 and 9070 operators are designed to operate vehicular slide gates in residential and light-duty commercial applications only. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements.
ADVANCED FEATURES:
Self-adjusting, no maintenance limits.
Ports for plug-in loop detectors.
Two convenience outlets.
Fail-safe release (fail-secure optional).
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.
SPECIFICATIONS:
Model 9050 Maximum gate length 16-feet. Maximum gate
weight 400 pounds*. (*Assumes gate is on level ground, in good condition
with properly adjusted hardware. Other external factors may affect the
performance of the gate operator.) 1/3 HP limited-duty motor. 115 VAC,
4.3 Amps. Class I applications. Compliant with UL 325 and 991. ETL Listed.
12"W x 24"H x 11.5"D
Model 9070 Maximum gate length 22-feet. Maximum gate
weight 500 pounds*. (*Assumes gate is on level ground, in good condition
with properly adjusted hardware. Other external factors may affect the
performance of the gate operator.) 1/2 HP continuous-duty motor. 115 VAC,
5.4 Amps. Operator is shipped with chain brackets and 20-feet of #41 chain.
Class I and Class II applications. Compliant with UL 325 and 991. ETL
listed. (Note: To be compliant with UL 325 and industry safety guidelines,
a secondary entrapment prevention device(s) is required to be installed
with this gate operator. Your professional DKS system installer can provide
you with more details on these devices and on current industry safety
standards.) Dimensions: 12"W x 24"H x 11.5"D |
|
|
swing up
circuit boards |
programming
switches |
|
convenience
outlets |
built in alarm
and power switch |
|
|
OPTIONS AVAILABLE WITH THIS OPERATOR:
Stainless steel housing.
#40 chain.
Nickel plated chain.
Stainless steel chain.
Plug-in loop detectors.
Heater kit for cold environments.
Base plate to post mount this operator (does not include posts).
|
