Click2Enter-I takes advantage of state of the art electronics presently being designed into scanner radio technology. This modified scanner/radio technology provides public safety agencies with a quick, safe, reliable, and stealthy means to activate gates or security control mechanisms.

Public safety agencies, such as Fire Departments, Police/Sheriff Departments, and Ambulance/Rescue Companies are issued radio frequencies by the FCC for their restricted use only. Possession of transmitting devices for non-authorized personnel is tightly controlled and transmitting on these frequencies is against the law (Federal & State statutes). The public's right to receive these emergency agency communications is not restricted, thus it is legal to possess emergency response scanning devices.

The Click2Enter-I combines the scanner/receiver technology with control technology to act as a radio controlled key to open access control devices (gates or security control mechanisms), thus allowing public safety agencies or any authorized users immediate access to deal with emergencies as they occur. To activate the Click2Enter-I the operator must be proximate to the device, and using two, short, transmission pulses of their radio transceiver is all that is required to initiate an instant activation/entry.

The Click2Enter-I uses technology that is inherent in most all radio broadcast equipment and adapts this technology to work as a control mechanism. We increase the security of the Click2Enter-I by requiring a verification of the FCC assigned carrier frequency and the agency assigned sub-audible communication (private line code). So it takes two separate verifications to effect an activation of the device.

We even have designed an "auto-load" feature into the Click2Enter-I so the sub-audible PL (private line) code is auto detected and auto loaded. The auto-load feature can be selected or the PL code can be manually assigned, the installer/programmer can choose either.

Click2Enter-I stores a running activation log, in memory, for operator recall. The Click2Enter system allows any public safety agency or authorized users access, as long as they are programmed into it's memory. Having the ability to program in multiple users answers the mutual aid problem that presently exists with other emergency access control products.

Programming of the Click2Enter-I is accomplished by way of an RS-232 computer interface, so any computer or similar device using standard modem protocol software can be used. Several more unique and desirable features are designed into each Click2Enter-I; please refer to the features list above for more details.

The entire activation sequence takes less than four seconds. The operator can be either on foot (using a portable radio), or in a moving vehicle (using portable or mobile radio)-It's as easy as:

1. Click
2. Red LED goes on
3. Release
4. Red LED goes on a second time
5. Click
6. Red LED blinks, Gate Opens

AAS | AeGIS | AGS | Aiphone | Aleen Technologies | Allstar | Antech | Apollo | BD Loops | Byan Systems | Chamberlain | Click2Enter | Cyrex | DC Solutions | Diablo Controls | Doorking | Dorene | Eagle | Elite | EMX | EntryWay | FAAC | G T O | Hy-Security | Keri Systems | LiftMaster | Linear | Mighty Mule | Miller Edge | MS Sedco | OSCO | Pach and Company | Preferred Power Products | Ramset | Reno A&E | ROFU | SEA | Securakey | Securitron | Sentex Systems | SES | Signal-Tech | Sos | Tektone | Tomar | Trigon Electronics | US Automatic | Zareba