We sell gate openers,gate operators,automatic gate openers,electric gate openers,swing gate openers,slide gate openers,solar gate openers, and more.
Gate-Opener.com sells gate openers,automatic gate openers,gate operators,electric gate openers,solar gate openers,automatic gate operators,electric gate operators,electronic gate openers, and more.
     We Price Match! Contact Us Now
Gate Opener Wizard
   
Need a Contractor?
Gate-Opener.com Home - Gate Opener list Gate-Opener.com Privacy Policy Gate-Opener.com UL325 Safety Standards Gate-Opener.com New Vendors Gate-Opener.com Credit Application Gate-Opener.com Contact Us
Easy DIY Gate Openers | Residential Gate Operators | Commercial Gate Operators | Intercom/Telephone Entry Systems |
Swing Gate Operators | Slide Gate Operators | Gate Operators Accessories | Gate Hardware | Installation Manuals
FREE SHIPPING - On orders over $250 - Applies to UPS Ground Only (No Common Carrier) - Click here for details

Home Page | 500 Series | 600 Series | 800/900 Series | Post Construction | Accessories
Transmitters/Receivers | Pre-wired Enclosures | G2M Single Phase Microprocessor | Warranty
800/900 SERIES I/O SERIES VEHICULAR CONTINUOUS DUTY COMMERCIAL INDUSTRIAL OR RESIDENTIAL
GATE OPERATOR
Byan 800/900 Series Gate Opener
Byan 800/900 Series Operator Arm
Byan 800/900 Series Gate Opener 800/900 Standard Operator:
  • This operator is used for most applications where the gate leaf does not exceed 16 feet
  • This operator will open a gate, with a 90 degree swing, in 12 seconds and close in 14 seconds swing
  • Byan 800/900 Series Gate Opener
    800/900 Long Operator:
  • This is normally used where the gate column is to large in diameter for normal mounting dimensions or the customer won't allow an insert to be installed in the column.
  • This operator will open a gate in 17 seconds with a 90 degree swing and close in 20 seconds.
  • Byan 800/900 Series Gate Opener
    800/900 Slow Speed:
  • The slow speed operator should be used where
       I. The gate leaf is over 16 feet
       II. The gate travels up or down hill
       III. The gate frame will flex when it reaches end of travel
  • The speed of this operator is 16 seconds to open and 19 seconds to close, for a 90 degree swing
  • Hydraulic openers lock in both the gate open position and closed position. For gates greater than 12 feet in length, electric locks are recommended. In some states and cities ( in case of a power outage), the gate must be able to be pushed open by the fire or emergency vehicle. We can take out the hydraulic check valve in the closed position. You must then use an electric lock to keep the gates closed. With the operator mounted inside the property, the operator can be installed to swing inward or outward. Most mechanical operators must be mounted on the side the gate will swing toward.
    BYAN 800/900 PACKAGES FOR SINGLE GATE SETUPS
    Part Number Description Voltage Price Buy
    BY800ST-PKG1 Model 800 Standard Operator Arm with 12" x 10" x 6" Pre-wired control box (part #12106) 220 Volts $2557.00
    BY800ST-PKG2 Model 800 Standard Operator Arm with 20" x 16" x 6" Pre-wired control box (part #20166) 220 Volts $2724.95
    BY800L-PKG1 Model 800 Long Operator Arm with 12" x 10" x 6" Pre-wired control box (part #12106) 220 Volts $2801.00
    BY800L-PKG2 Model 800 Long Operator Arm with 20" x 16" x 6" Pre-wired control box (part #20166) 220 Volts $2968.95
    BY800SP-PKG1 Model 800 Slow Speed Operator Arm with 12" x 10" x 6" Pre-wired control box (part #12106) 220 Volts $2607.00
    BY800SP-PKG2 Model 800 Slow Speed Operator Arm with 20" x 16" x 6" Pre-wired control box (part #20166) 220 Volts $2774.95
    BY900ST-PKG1 Model 900 Standard Operator Arm with 12" x 10" x 6" Pre-wired control box (part #12106) 115 Volts $2557.00
    BY900ST-PKG2 Model 900 Standard Operator Arm with 20" x 16" x 6" Pre-wired control box (part #20166) 115 Volts $2724.95
    BY900L-PKG1 Model 900 Large Operator Arm with 12" x 10" x 6" Pre-wired control box (part #12106) 115 Volts $2801.00
    BY900L-PKG2 Model 900 Large Operator Arm with 20" x 16" x 6" Pre-wired control box (part #20166) 115 Volts $2968.95
    BY900SP-PKG1 Model 900 Slow Speed Operator Arm with 12" x 10" x 6" Pre-wired control box (part #12106) 115 Volts $2607.00
    BY900SP-PKG2 Model 900 Slow Speed Operator Arm with 20" x 16" x 6" Pre-wired control box (part #20166) 115 Volts $2774.95
    ACCESSORIES
    BYLDTG Linear DTG Receiver  $79.00
    BYLDTI Linear DTI One Button Transmitter  $32.50
    BYLIACT-21B Linear LIACT-21B Linear 1 channel mini block coded transmitter  $27.95
    BYLIACT-22AB Linear LIACT-22AB 3-Channel keychain transmitter  $27.95
    BYLIACT-31B Linear LIACT-31B linear 1 channel keychain transmitter  $27.95

    Ideal for Gates
    A device which is specially designed to operate with precision under the most demanding conditions. Various power rates and functions may be modified for all types of gates.
    Eliminator Series
    Slows down the final 5 degrees of travel in both directions. No need for positive stops and has a very soft stop.
    No Maintenance
    The oil-coated internal components and superior mechanical quality exceed service life requirements and require virtually no maintenance.
    Quick & Easy Installation
    Two brackets, simple assembly, time-saving. No physical stops.
    Variable Power
    It is the most powerful model in its category. By simply regulating the limiter valves it may be adapted to the required pressure. Independent open or lock alignment.
    Hydraulic Safety
    By regulating the pressure to a suitable level, our equipment operates gently but firmly. The gate may even be stoped manually when in motion.
    Thermal Protection   (:smile:)
    All units equipped with a thermal probe which, in the event of overheating ensures that by cutting off the power supply the operating is interrupted.
    OPERATOR AND MOTOR SPECIFICATIONS
    Electric Motor Single Phase Built-in Thermal Overload
    800A Series Power Supply 220 VAC, 60 Hz.
    900A Series Power Supply 115 VAC, 60 Hz.
    Capacitor Rating 10 UF/ 35 UF/40 UF
    Standard Working Pressure 1,650 PSI
    Maximum Working Pressure 1,750 PSI
    Pump Spur Gear .66 LTR/Min.
    Motor 1/6 Horsepower
    Amperage Draw 4 Amps
    Operator Length (with piston retracted and rear bracket and swivel joint installed) 754 to 904 mm (29-11/16 to 35-5/8 inches)
    Operator Length (with piston extended and rear bracket and swivel joint installed) 1,004 to 1,304 mm (39-1/2 to 51-5/16 inches)
    Operator Width 3-3/8 x 3-3/8 inches
    Operator Height 4.31 inches (w/lock cover)
    Speed to 90 Degrees 13 Seconds
    Piston Stroke 250 mm (9-7/8 inches)
    400 mm (15-3/4 inches)
    Ambient Operator Temperature Range -60 to 220 Degrees F
    Hydraulic Fluid Tellus T-15
    Adjustable Pressure Setting in Both Open and Closed Directions
    Shipping Weight (Normal/Slow Speed) 32 lbs.
    Shipping Weight (Long) 27 lbs.



    Gate operator installations should be completed by a qualified installer only. B.J. Esberner and Associates, Inc. assumes no liability if product is installed incorrectly. Please see owners / installation manual for further details.

    © Copyright 1997-2007
    1 800 593 6095 Toll Free
    Contact Us


      Join our mailing list to keep informed of new products and sales!
    Enter your email address below, then click the 'Join Now' button:

     
    Enter Email:

    AAS | AeGIS | AGS | Aiphone | Aleen Technologies | Allstar | Antech | Apollo | BD Loops | Byan Systems | Chamberlain | Click2Enter | Cyrex | DC Solutions | Diablo Controls | Doorking | Dorene | Eagle | Elite | EMX | EntryWay | FAAC | G T O | Hy-Security | Keri Systems | LiftMaster | Linear | Mighty Mule | Miller Edge | MS Sedco | OSCO | Pach and Company | Preferred Power Products | Ramset | Reno A&E | ROFU | SEA | Securakey | Securitron | Sentex Systems | SES | Signal-Tech | Sos | Tektone | Tomar | Trigon Electronics | US Automatic | Zareba


    Featured Links:
    - Electric Gate Openers
    - Need Contractor?