We sell gate openers,gate operators,automatic gate openers,electric gate openers,swing gate openers,slide gate openers,solar gate openers, and more.
Gate-Opener.com sells gate openers,automatic gate openers,gate operators,electric gate openers,solar gate openers,automatic gate operators,electric gate operators,electronic gate openers, and more.
     We Price Match! Contact Us Now
Gate Opener Wizard
   
Need a Contractor?
Gate-Opener.com Home - Gate Opener list Gate-Opener.com Privacy Policy Gate-Opener.com UL325 Safety Standards Gate-Opener.com New Vendors Gate-Opener.com Credit Application Gate-Opener.com Contact Us
Easy DIY Gate Openers | Residential Gate Operators | Commercial Gate Operators | Intercom/Telephone Entry Systems |
Swing Gate Operators | Slide Gate Operators | Gate Operators Accessories | Gate Hardware | Installation Manuals
FREE SHIPPING - On orders over $250 - Applies to UPS Ground Only (No Common Carrier) - Click here for details

Home Page | 500 Series | 600 Series | 800/900 Series | Post Construction | Accessories
Transmitters/Receivers | Pre-wired Enclosures | G2M Single Phase Microprocessor | Warranty
600 SERIES I/0 RESIDENTIAL AND MEDIUM DUTY
COMMERCIAL SWING GATE OPERATOR
Byan 600 Series Gate Opener
Byan 600 Series Operator Arm

This operator is to be used in applications that require 100 cycles per hour or less. It is ideal for residential or medium duty commercial applications that do not require continuous duty. It is unique in that it does not need positive stops as other hydraulic operators do. On all hydraulic operators, the gates must make contact with an obstruction which causes them to stop, both in the closing and opening modes. The 600 does not need this, it travels at normal speed and when it is about 5 to 10 degrees from the end of travel in both directions it slows down automatically, thus no need for positive stops. It is recommended that gates of 12' should also have an electric lock. With the operator mounted inside the property, the operator can be installed to swing inward or outward.
BYAN 600 PACKAGES FOR SINGLE GATE SETUPS
Part Number Description Voltage Price Buy
BY600-PKG1 Model 600 Operator Arm with 12" x 10" x 6" Pre-wired control box (part #12106) $2364.95
BY600-PKG2 Model 600 Operator Arm with 20" x 16" x 6" Pre-wired control box (part #20166) $2517.95
ACCESSORIES
BYLDTG Linear DTG Receiver  $79.00
BYLDTI Linear DTI One Button Transmitter  $32.50
BYLIACT-21B Linear LIACT-21B Linear 1 channel mini block coded transmitter  $27.95
BYLIACT-22AB Linear LIACT-22AB 3-Channel keychain transmitter  $27.95
BYLIACT-31B Linear LIACT-31B linear 1 channel keychain transmitter  $27.95

Ideal for Gates
A device which is specially designed to operate with precision under the most demanding conditions. Various power rates and functions may be modified for all types of gates.
Eliminator Series
Slows down the final 5 degrees of travel in both directions. No need for positive stops and has a very soft stop.
No Maintenance
The oil-coated internal components and superior mechanical quality exceed service life requirements and require virtually no maintenance.
Quick & Easy Installation
Two brackets, simple assembly, time-saving. No physical stops.
Variable Power
It is the most powerful model in its category. By simply regulating the limiter valves it may be adapted to the required pressure. Independent open or lock alignment.
Hydraulic Safety
By regulating the pressure to a suitable level, our equipment operates gently but firmly. The gate may even be stoped manually when in motion.
Thermal Protection  (:smile:)
All units equipped with a thermal probe which, in the event of overheating ensures that by cutting off the power supply the operating is interrupted.
OPERATOR AND MOTOR SPECIFICATIONS
Model 500 115 VAC Single Phase Built-in Thermal Overload
Model 500B 115 VAC Single Phase Built-in Thermal Overload
Capacitor Rating 10 UF/ 35 UF/40 UF
Standard Working Pressure 1,650 PSI
Maximum Working Pressure 1,750 PSI
Pump Spur Gear .66 LTR/Min.
Motor 1/6 Horsepower
Amperage Draw 4 Amps
Operator Length (with piston retracted and rear bracket and swivel joint installed) 714 mm (28-1/8 inches)
Operator Length (with piston extended and rear bracket and swivel joint installed) 964 mm (37-15/16 inches)
Operator Width 3-3/8 x 3-3/8 inches
Operator Height 4.33 inches (w/lock cover)
Speed to 90 Degrees 12 Seconds
Piston Stroke 250 mm (9.88 inches)
Ambient Operator Temperature Range -60 to 220 Degrees F
Hydraulic Fluid Tellus T-15
Adjustable Pressure Setting in Both Open and Closed Directions
Shipping Weight 27 lbs.



Gate operator installations should be completed by a qualified installer only. B.J. Esberner and Associates, Inc. assumes no liability if product is installed incorrectly. Please see owners / installation manual for further details.

© Copyright 1997-2007
1 800 593 6095 Toll Free
Contact Us


  Join our mailing list to keep informed of new products and sales!
Enter your email address below, then click the 'Join Now' button:

 
Enter Email:

AAS | AeGIS | AGS | Aiphone | Aleen Technologies | Allstar | Antech | Apollo | BD Loops | Byan Systems | Chamberlain | Click2Enter | Cyrex | DC Solutions | Diablo Controls | Doorking | Dorene | Eagle | Elite | EMX | EntryWay | FAAC | G T O | Hy-Security | Keri Systems | LiftMaster | Linear | Mighty Mule | Miller Edge | MS Sedco | OSCO | Pach and Company | Preferred Power Products | Ramset | Reno A&E | ROFU | SEA | Securakey | Securitron | Sentex Systems | SES | Signal-Tech | Sos | Tektone | Tomar | Trigon Electronics | US Automatic | Zareba


Featured Links:
- Electric Gate Openers
- Need Contractor?